Filter By:
- Bar Ends (12)
- BMX (46)
- Bottom Brackets (202)
- Brakes/Levers/Pads (545)
- Cables (144)
- Cassettes/Freewheels (130)
- Chainrings (216)
- Chains (107)
- Show More Categories
- Cranksets (245)
- Derailleurs (158)
- Forks (88)
- Groups (12)
- Handlebar Grips/Tape (211)
- Handlebars (187)
- Headsets (139)
- Pedals (218)
- Saddles (223)
- Seatposts (80)
- Shift/Brake Combinations (75)
- Shifters (121)
- Shocks (29)
- Stems (101)
- Other (1445)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc.
KEY FEATURES
- Round edge braking surface
- Custom steel braking surface riveted to an aluminium central carrier
- Standard 6 bolt fitting
- Available in: 140mm & 160mm
- Floating design deals with changes in temperature
- Weight: 115g
- Available in black, silver, bronze, red, blue, purple & orange
Brake pads include spring clip and pin
Brake pads are dyno tested in-house in Barnoldswick
Available for all our current brakes and older models
All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
We keep a wide range of pads to suit all our brakes
Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level X-Series chains.
- Includes KMC Missing Link I
- Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting
- Mushroom riveted pins for the highest pin power and allows shifting under heavy loads
- Stretch Proof heat treatment so the chain last longer and goes farther
- Half nickle plated
- 1/2" x 3/32"
- Weight: 286 gr
- LEV has always represented the latest technology but is already a classic among top contending dropper posts.
- With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.
- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike.
- With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy.
- Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release Angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 233g
- Weight (pair + cleats): 521g
SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.
- Royal Vacuum Light (RVL) technology
- Cool cover helps reflect heat, so it stays cooler than traditional black saddles
- Water-resistant
- Royalgel
- Elastomers
- Integrated Clip System
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
The Shimano FC-RX820 crank balances weight savings, optimized efficiency and an array of gearing options that cater to the segmented demands of mixed-terrain riding.
- Gravel-optimized 48-31t gear combination ratios preserve riding rhythm on rough surfaces
- The 17t range covers an array of riding conditions
- Smaller gear steps for cadence control on mixed-terrain riding
- Hollowtech II crank arms provide strength and stiffness with the benefit of weight savings
- Compatible with HG 12-speed chains
- 47mm chainline
- 151mm Q-factor
Shimano’s GRX RX825 Di2 2x 12-Speed front derailleur delivers quick and precise front shifting even under heavy loads. Designed for a wider, 17t gear range, it utilizes a +2.5mm chainline for improved tire clearance. The FD-RX825 is compatible with Full, Semi-Synchronized shift modes as well as the new FRONT SHIFT NEXT function for greater rider customization.
- Wider tire clearance made possible by the +2.5mm chainline vs. conventional road front derailleurs
- Wider range front gear by utilizing a 17t front range
- FRONT SHIFT NEXT function for greater rider customization
- Conveniently compatible with Full, Semi-Synchronized shift modes
The Body Geometry Comfort Gel is ergonomically designed and scientifically tested to provide unmatched comfort and support while reducing pressure on soft tissue.
- Plush foam combined with gel inserts delivers unmatched comfort.
- Anatomically designed Body Geometry groove improves blood flow and comfort.
- Vacuum formed construction creates a durable and waterproof saddle.
- Level 5 padding: Ideal for commuting and casual riding
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
CNC machined 6061 aluminum
Black anodized finish
Thru Axle Thread Pitch M12x1.0
Use without the B-Link when attaching
Retains ability of original SRAM UDH to rotate under impact to help protect the derailleur in the event of an impact.
Adds direct mount compatibility with Shimano Road and Gravel deraileurs to any SRAM UDH compatible frame.
Optimized for Shimano-Dura-Ace (R9100 and R9150), Ultegra-(R8000, R8050, RX800, and RX805), 105 (R7000), and GRX-(RX810, RX812, RX815, RX817, and RX400)
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.70
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
Page 1 of 154
Next page