Filter By:
Brakes/Levers/Pads
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$4.28
Brass hose insert for Hope hydraulic disc brakes.
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$70.00 - $75.00
Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own
FEATURES
- Constructed in two parts, aluminium centre and stainless steel braking surface.
- High performance disc, allowing the stainless steel outer to expand separately
from the centre and handle high temperatures without warping.
- Hope floating rotors have a true floating design which allows 1 degree of freedom.
This means the outer is always free to expand when subjected to heat.
- Lightweight design.
- Aluminium centre acts as heat sink keeping disc temperatures lower.
- CNC machined centre is stiff and lightweight so has the advantages
of a thicker fixed disc without the weight penalty.
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$63.90
Hope Brake Line kits
· Works for front or rear
· Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes
· Length is 1500mm
$21.00 - $25.00
All our brake pads are designed and dyno tested in-house at Barnoldswick
All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
We keep a wide range of pads to suit all our brakes
Almost all our brake pads are available in sintered or standard compound options
All our brake pads come with the necessary hardware
$101.20 - $107.50
The Hope MTB Floating Centre-Lock disc brake rotor is a high performance option designed for demanding applications. Constructed in two parts, the aluminum center provides weight savings, while the specially formulated laser-cut 410 stainless-steel braking surface can handle high temperatures without warping.
- High performance disc allows the stainless steel outer to expand separately from the center to handle high temperatures without warping
- True floating design allows 1 degree of freedom so outer is always free to expand when subjected to heat
- CNC machined aluminum center is stiff and lightweight to offer the advantages of a thicker fixed disc without the weight penalty
- Aluminum center acts as heat sink to keep disc temperatures lower for reliable braking
- Laser-cut and heat-treated 410 stainless steel braking surface provides increased life and oxidation prevention
- 1.8mm thickness (1.5mm minimum)
$25.00
Hope Mono Mini Disc Brake Pads.
· Sintered: high-graphite compound; best for wet weather durability
· Organic: Softer compound than sintered, works better in dry conditions, but wears faster
· Fits Tech and Tech Evo M4 Brakes
$22.00
Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets.
- CNC machined in Barnoldswick, England
- Includes mounting bolts
$22.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks.
KEY FEATURES
- We hold a wide selection of caliper mounts to fit perfectly with our brake systems
- Most of our mounts are available in a choice of black or silver
- Brake mounts are machined from T6 2014 alloy
- We have designed the brackets only for the purpose stated
- All mounts are supplied with bolts for mounting to frame/fork
*NOTE: Will not work with most Post Mount Marzocchi forks*
- Weight from: 20g
- All mounts come with bolts to fit to fork/frame
- A wide selection to fit most combinations
- CNC machined
$27.50
Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets.
- CNC machined in Barnoldswick, England
- Includes mounting bolts
$22.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks.
KEY FEATURES
- We hold a wide selection of caliper mounts to fit perfectly with our brake systems
- Most of our mounts are available in a choice of black or silver
- Brake mounts are machined from T6 2014 alloy
- We have designed the brackets only for the purpose stated
- All mounts are supplied with bolts for mounting to frame/fork
*NOTE: Will not work with most Post Mount Marzocchi forks*
- Weight from: 20g
- All mounts come with bolts to fit to fork/frame
- A wide selection to fit most combinations
- CNC machined
$21.00 - $25.00
Hope RX4-SR disc brake pads are available in a range of compounds to optimize riders specific performance needs. All pads are designed and dyno-tested in-house at Barnoldswick.
- Designed to work with SRAM dropbar brake systems (DOT Fluid)
- Softer than sintered, organic pads are low-noise and perform best in dry conditions, but wear faster
Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc.
KEY FEATURES
- Round edge braking surface
- Custom steel braking surface riveted to an aluminium central carrier
- Standard 6 bolt fitting
- Available in: 140mm & 160mm
- Floating design deals with changes in temperature
- Weight: 115g
- Available in black, silver, bronze, red, blue, purple & orange
$270.00
The Tech 4 E4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation.
The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining.
KEY FEATURES
- Increased power versus Tech 3
- Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking.
- Hinged clamp reducing weight and to improve ergonomics
- Tool free bite point and reach adjustments
- Hybrid piston design
- Rigid CNC'd one piece caliper
- Compatible with a wider range of current shifter options
- Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange.
- Choose either standard or braided hose (braided hose is an extra cost)
- 30% pressure increase compared with the Tech 3 brake
- Reservoir area increased to lower overall stack height.
- Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options.
- Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use.
- The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3
- All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here.
- Maxium Rotor thickness for E4 caliper 2.3mm
$25.00
Pads available in a range of compounds for all Hope brakes - whatever the age. All pads are designed and dyno tested in-house at Barnoldswick. Available in Race, Standard, Sintered and Road compounds
KEY FEATURES
- Choice of Race, Standard or Sintered compounds for all MTB brakes. Road compound available for RX4+ calipers.
- Brake pads include spring clip and pin
- Brake pads are dyno tested in-house in Barnoldswick
- Available for all our current brakes and older models
- All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity
- We keep a wide range of pads to suit all our brakes
$284.00
The XCR Pro lever is the ultimate in lightweight design. With a Carbon lever blade and titanium hardware, combined with the E4 4-piston caliper you have a powerful lighter weight trail/downcountry brake.
- The XCR Pro lever is 10% more powerful than the Hope Race Evo and features a carbon blade with titanium hardware for a lightweight minimalist design
- Lever body is CNC machined from high grade forged aluminum billet for extreme durability and weight savings
- Lever reach adjustment allows the rider to customize the fit
- Hinged clamp offers simple and easy installation
- Rigid CNC machined one-piece 4-piston caliper is incredibly durable and lightweight
- Lightweight aluminum backed Race pads
- Compatible with all current Tech 3 shifter mounts
- Crimped hose design on caliper adds enhanced security
Page 1 of 1